Category: Mechanical Stuff

Splendido, our beloved Catalina 270 LE, is for sale — and ready for new adventures

On By David BranbyIn Keeping Up Appearances, Mechanical Stuff, SplendidoLeave a comment

A lovely woman and blog-reader from the Chesaspeake Bay area reached out to us a few weeks back with an interest in buying our much-adored Splendido. Her story really struck a chord with me: Now in her 70s, she had grown up sailing on Cal 25s and, reminscing on those happy times, had a vision of buying Splendido for herself and her college-age son, who is absolutely wild about sailing on those legendary waters. She had recently bought a second home on the water’s edge, and we had several long and delightful phone calls about the pros and cons of buying this boat for what she and her son were seeking. She had fallen in love with the appearance, upgrades, and care and attention that Debbie and I had put into Splendido over the years. In the end, it turned out that hauling this 27′ sailboat and her 38′ double-axle trailer 2,700 miles across the country would add $7-10K to the cost, and — not suprisingly — that was the deal-breaker. Though disappointed at the missed opportunity to pass along our Splendido to someone who truly appreciated her, Debbie and I loved that she saw in our boat what we see — a refitted, lovely, sea-kindly “good old boat,” which is exactly what we set out to achieve when we bought her.

Splendido - New Interior

I’d like to give credit where credit is due, however: When we bought the boat in 2010, the first thing I had done was an eight-hour-long, comprehensive survey by Vince DiLeo, AMS® of Admiralty Marine Services. Vince provided us with a detailed report of everything that needed to be done to restore Splendido to first-class working order, mechanically, structurally and equipment-wise. We immediately prioritized the list and got after it, and — as I’ve said before — while you can’t make a good old boat “brand new” again, you can make her the best “good old boat” she can be, which I think we’ve achieved.

That said, we’re selling Splendido in the condition you see here (and, though I flatter myself, I doubt one could find a better-documented (the good, the bad, and the hard work involved) sailboat ownership journey anywhere than the 15-year-old blog you’re reading now!), in a package that includes her two-axle trailer, Walker Bay dinghy, Shipshape winter cover and frame, plus four tidy storage bins full of the sailing necessities you rarely think about that makes buying a “pre-loved” boat a bonus over buying new.

Before I sail off into the sunset, I want to give a massive shout-out to my sailor pal, shipwright and mechanical wiz Ancil Sigman of Pleasant Valley, Nevada, who found ways to restore and improve Splendido that I hadn’t even dreamt of. She wouldn’t be half the boat she is with Ancil’s tireless tinkering, expertise, and care. Thanks, Ancil!

Thanks, too, to you, gentle reader, for sharing this news with your personal and professional networks. I’m giving personalized tours beginning this afternoon to interested sailors, though I have to laugh — it’s a different experience showing a boat that’s on the hard, on her trailer, winterized and all packed up for our seven-month “sleep” here in the foothills of the High Sierra, versus having someone climb aboard at Obexer’s or Tahoe City Marina, cast off and head out across Big Blue. I’m getting a little misty-eyed just writing this, so I’ll sign off by saying fair winds, smooth sailing, and here’s my favorite sailing poem to meditate on. Until next time… DB

Sea-Fever

BY JOHN MASEFIELD

I must go down to the seas again, to the lonely sea and the sky,

And all I ask is a tall ship and a star to steer her by;

And the wheel’s kick and the wind’s song and the white sail’s shaking,

And a grey mist on the sea’s face, and a grey dawn breaking.

I must go down to the seas again, for the call of the running tide

Is a wild call and a clear call that may not be denied;

And all I ask is a windy day with the white clouds flying,

And the flung spray and the blown spume, and the sea-gulls crying.

I must go down to the seas again, to the vagrant gypsy life,

To the gull’s way and the whale’s way where the wind’s like a whetted knife;

And all I ask is a merry yarn from a laughing fellow-rover,

And quiet sleep and a sweet dream when the long trick’s over.

Fall is in the air

On By David BranbyIn Commissioning & De-commissioning, Mechanical Stuff, Splendido2 Comments

Here’s to another summer sailing season at Lake Tahoe in the books! My pal Ancil and I drove up early yesterday morning to haul out Splendido for the winter. We arrived well before any of the staff was up at Obexer’s Marina, so we did our prep work (loosening the shrouds and stays) and were ready to go when Bret and Jessy fired up the Marina Bull to unstep the mast and lift Splendido gently out of the water and place her on her 38′ trailer.

Two days before, I had bade farewell to our lovely mooring at Hurricane Bay and motored down the 2-1/2 miles to Obexer’s, as they gave me permission to take an empty slip in preparation for our haul-out. On the way down, winds were 12 knots out of the east with that long fetch from Cave Rock on the east shore all the way to McKinney Bay on the west, so it was quite the rock ‘n’ rolling ride, with occasional three to 3-1/2 foot swells and water splashing over the side, which made for a lively passage.

Hauling out a 27′ sailboat like Splendido is fairly straightforward, although I’m always a bit “on point” because there’s a lot of moving parts, literally and figuratively. First, we move the boat nose first into the haul-out slip and tie her off with four lines. Then, the forklift comes in and they put a harness around the mast at the balance point near the lower spreaders. We then release the lower shrouds, upper shrouds, forestay and backstays, and they unstep the mast and place it gently on sawhorses. I then tie down all the rigging and remove the wind instruments and put them in their winter storage box. Next, we move the boat out of the slip and back it in so the stern is facing the forklift. They get it balanced on the forks, then gently lift her out and set her on her trailer. Finally, they lift up the mast once again and set it on top of the boat. We lash everything down, put the dinghy on the trailer, go have lunch at The Bridgetender in Tahoe City, and head down to the boatyard.

The ride down the hill from Tahoe (6,230 ft. above sea level) to Splendido’s winter home (4,800 ft. above sea level) was smooth and uneventful — just the way I like it. Over the next week or two, I’ll get her cleaned up and winterized, which means draining the water heater, blowing out the water lines with compressed air so there’s nothing to freeze, changing the oil and filter, topping off the fuel and buttoning her up. Ancil (who cannot help but to make constant improvements on anything that catches his eye) surprised me earlier this summer by mounting an aluminum truck storage box he’d found for free on Craigslist to hold gear, tools, and whatnot on the trailer. It looks and works great. While he was cleaning out his shop recently, he came across some steel bars and decided to fabricate, primer and paint four “mast holder” extensions that will support the mast on the lower right side of the trailer when it’s time to put on the winter cover later this fall. I can’t thank him enough for all he’s done to make sailing Splendido safer, easier, and more convenient. Thanks, Ancil!

As I write this, the aspens are beginning to turn here in the high country; the birds are flying south and the Nevada sky has turned that deep, lustrous blue that means the first blustery winds of the season are not too far around the corner. I am immensely grateful for every moment spent sailing Splendido and working on her to make her the best good old boat she can be.

I look back and recall fondly the four years(!) Debbie and I spent looking on our laptops for a boat that spoke to us and that we could afford. When we happened upon the Catalina 270 — named Boat of the Year by Cruising World Magazine the year it was unveiled — our minds were made up, and we’ve never regretted that decision. Splendido has been yar, which means lovely, balanced and quick. We learned that watching The Philadelphia Story with Katherine Hepburn (Tracy Lord) and Cary Grant (C.K. Dexter Haven) who were reminiscing about their sailboat, The True Love:

Tracy: It was beautiful – and sweet, Dex.
Dexter: Yes, yes. She was quite a boat, the… True Love, wasn’t she?
Tracy: Was, and is.
Dexter: My, she was yar.
Tracy: She was yar alright. 

Fair winds and smooth sailing. DB

Back on the water at last

On By David BranbyIn Commissioning & De-commissioning, Mechanical Stuff, On The Water, SplendidoLeave a comment

This year marks our 15th year of owning our lovely sailboat, Splendido, and it seems we were as busy over the winter fixing things as we’ve ever been. My sailing pal Ancil Sigman likes to joke that all she needs is a new gas cap and she’s a brand-new boat. 🙂 In a nutshell, we:

1) Disassembled, installed a complete rebuild service kit, and reassembled the Hurth transmission

2) Replaced all four motor mounts

3) Repacked the stuffing box

4) Dropped the rudder, cleaned the shaft and installed new rudder washers

5) Replaced the glow plugs and fixed the electrical wiring so the plugs actually warm up — now it starts like it should!

6)  Re-wired and grounded the alternator properly with the help of AI and now everything works as it should — including the tachometer and battery warning light on the panel.

I learned so much working with Ancil over the winter. The man is mechanically gifted, to say the least. However, he’s not the best weather forecaster. Three storms ago he told me spring was sprung and we wouldn’t be seeing any more nasty weather. 😀 

Launch day went very smoothly, although I tell my wife Debbie that owning a sailboat around here is like having an erector set (that was a toy kit back when we were kids where you could build things out of various parts, which they still make today) that you pull out in the spring and in the fall. First, you launch the hull and check for leaks. Then, you step the mast. Then, you attach and tune all the shrouds and stays. Then, you install cotter rings on everything, and then you put rigging tape over all those. Then, you have to wipe down the boat inside and out, as the pitter patter of everyone’s feet leaves your ordinarily white decks a hazy shade of gray. C’est la vie.

Here it is, June 1 already, and I, unfortunately, have not been able to sail yet. I spent the better part of a day trying to adjust the stuffing box I’d recently repacked, and didn’t quite nail it. You’re supposed to get 2-3 drops of water per minute when the drive shaft is turning, but I either got a lot more than that or nothing at all, which is not what you want. (No drips means it’s probably adjusted too tightly, so it’ll heat up and possibly score the drive shaft.) It’s a dicey thing, though: Who even wants one drip of water in their boat when it’s under way? 🙂

As I was playing with the stuffing-box adjustment, suddenly water started spurting out of the back end of the heat exchanger. A little investigating revealed that the back-end boot from the heat exchanger tube had developed a crack, so I phoned Trans Atlantic Diesel and ordered up a new boot. It should arrive this week. In the meantime, I’ve got all the little things taken care of around the boat, so she’s technically ready to sail right now.

The good news is, the lake level is high, the Tahoe parks folks have done a great job of cleaning up the detritus where I keep my dinghy, and the smell of the pines and the lovely breeze beckons me to get out on the water. More when it happens — until then,

Fair winds and smooth sailing! DB

Reflections on a season of midweek sailing at Tahoe

On By David BranbyIn Commissioning & De-commissioning, Mechanical Stuff, On The Water, Ports Of Call, SplendidoLeave a comment

Debbie and I had one goal this sailing season, and that was to try to relax and enjoy our new-found leisure time after I stepped away from my long advertising career at the end of January. We were excited to see how we could go from being the typical “weekend warrior”-type sailors we’d been for the past 14 years to any-day-of-the week yachties able to get far from the madding crowds as much as possible. We discovered, to our delight, how empty Lake Tahoe is in the summer Mondays through Thursdays (apart from July 4th and Labor Day weeks, of course). When you’re out on the water midweek, you really do feel like you have the whole place to yourselves.

Nevertheless, we did find time to socialize a bit, whether at Chambers Landing, where they’re really stepped up their game of late with new management, or happily running into our nephew Dusty Cady as he was in the midst of a stand-up paddleboard circumnavigation (yes, 72 miles of paddling and camping out over five days). In early summer, our friends Fred and Alice at Big Blue Tahoe Yacht Club threw a backyard party with delicious paella, where we reconnected with Brady Trautman and met Alex Blue and Sharky of SV Delos and Cruisers Academy fame. When the weather warmed up, my sailing pals Ancil Sigman of La Crapaud and John Turner of Grand Cru invited me out to enjoy a relaxing day floating, eating and swimming off Baldwin Beach, followed by a tour of majestic Emerald Bay, which I hadn’t visited in a long while.

While nothing catastrophic happened (thank you, universe) other than someone stealing our buoy tags, we did have some lively moments, like when the sail slides on the mast all blew out right after I’d hoisted the main. In an instant, our mainsail turned into a wildly flapping spinnaker. Fortunately, I was able to pull it down quickly and continued sailing under genoa alone up to Tahoe City Marina, where you could not buy — at any price — a damn sail slide. (I now have enough backup sail slides to take care of two future blow-outs, thanks to our friends at Sailrite.) Oddly enough, a week later, that very same failure happened to John Turner aboard Grand Cru. The lesson here is that things age quickly at Lake Tahoe’s 6,225-ft. elevation, especially plastic sail slides. Back in my garage, it took me about four hours to sew on the new sail slides and shackles (another interesting lesson: I thought sail slides all just attached via snaps or screws, but half of the sail slides on my main had to be laboriously hand-sewn on. That would be quite the PITA if you had to do it aboard a pitching sailboat at sea).

One highlight of the season for me was to catch my first ride on Terry Wasik’s legendary Cheeseburger in Paradise, a 41-ft. Hunter sailing out of Obexer’s Marina. Last season, Terry had hauled Cheeseburger to the coast and sailed down to Mexico in the Baja Haha flotilla. I am deeply appreciative of having the opportunity to spend a lovely day of fine sailing aboard this gorgeous vessel with a crew of 5 or 6 guests while (appropriately enough) Jimmy Buffet serenaded us. Thanks, Terry!

While our good old boat only has about 700 hours on her 18 hp diesel, one day, I heard a grinding noise down below and discovered that the crankshaft was turning while the engine was turned off and in neutral, which was a real head-scratcher for me. Ancil theorized that the clutch plates had warped over the years and were causing the shaft to turn, which is not optimal. At the end of the season, we removed the drive shaft, pulled the transmission out, got it cleaned up and now plan to install a service kit to get things working properly again. I’m also thinking about replacing the worn engine mounts, which is kind of a big deal, but that should reduce engine noise and vibration as well. I’ve also got to drop the rudder and mount a new rudder bushing which I accidentally discovered while diving the hull in August. What do we live for, hey? 🙂

Alas, the season is so short at Tahoe, and before I knew it, it was time to bring Splendido down to Reno and put her away for the winter. I built a proper frame for her new-to-me winter cover, so I’m really grateful to be able work on her out of the weather this winter (and staying pretty warm when the sun’s out) while she’s on the hard. Next season will be here before we know it. Until then…

Fair winds and smooth sailing! DB

Just Add Water

On By David BranbyIn Commissioning & De-commissioning, Keeping Up Appearances, Mechanical Stuff, SplendidoLeave a comment

We launch Splendido in three days, and the past six weeks have been a whirlwind of activity getting her prepped for the Tahoe sailing season. The theme this spring was, “OK, what really needs to be addressed on a well-loved 31-year old sailboat that has seen lots of use? Fortunately, my mechanical-genius pal Ancil Sigman had plenty of suggestions, as you’ll see below.

The things I intended to fix in the off-season:

  • Make a better rope with knots in it to pull up the swim ladder.

The things Ancil heartily encouraged me (and tirelessly helped me) to fix in the off-season:

  • We pulled out every inch of the original (but significantly corroded) battery cables and replaced them with beefier, brand-spankin’ new cabling, all nicely heat-shrinked, from the battery bank to the panel to the engine, inverter, etc.
  • Upgraded the boat trailer with new running lights, from hitch to taillights.
  • Pulled out two bent lifeline stanchions, straightened them, then properly re-bedded and reinstalled them.
  • Replaced all the lifelines on the boat.
  • Removed the cabin windows that were popping up (hey, 31 years is a pretty good run), re-glued them with 3M VHB tape, and scraped/re-caulked all the windows on the boat.
  • Completely rebuilt the Whale Galley Gusher pump with a new service kit (way, way harder and less intuitive than it sounds). First clue: The schematic they provide was way too low-rez to be helpful, and nothing on YouTube™ showed how to do it properly. Even the factory’s customer service lady gave us the wrong instructions. In the end, I had to call on Perplexity.ai to finally spit out the right way to do it.
  • While the icebox pump was out, I sanded, cleaned and re-fiberglassed the area under the stove with a couple layers of cloth. Turned out great. 
  • Also laid in some fiberglass cloth and epoxy on the stern shower fixture door, which had cracked with age. It looks pretty good now with a little gel coat added.
  • Replaced every seacock on the boat with new Forespar® Marelon™ seacocks. This took a ton of work because the handles don’t come off of the new ones, so you have to grind out the cabinetry in the tight spaces so you can screw the new seacocks onto the thru-hulls.
  • Replaced the cheap CDI plastic furling drum cover that broke after only two seasons (are you listenin’, CDI?) with a proper metal replacement drum cover which should have been standard issue to begin with. (Replacing this was a major pain).
  • Since the mast was down on sawhorses, we took the opportunity to service it from tip to base, checking the sheaves, fasteners, spreaders, boots, wiring, lights, etc. Ancil rigged a gypsum-board lifter to help get the 200-lb. mast back up on the boat. Thank you, Ancil!
  • Checked the steering cables looking for fishhooks (there weren’t any — whew!).
  • Tried to remove the pinkish stain around the port-side Splendido logo that happened the winter we kept the boat on the hard up at Obexer’s. Tried four or five coats of oxalic acid, several fiberglass cleaning products, Soft Scrub … nothing worked. At best, I got it to lighten maybe 15% or so. Dang.
  • Applied gel coat to nicks on the transom and elsewhere in the cabin, then wet-sanded it and polished it up.
  • Removed all the original curtains in the boat, soaked them in OxyClean and mild washing soap, re-sewed the hook-and-loop parts that had come undone, and re-attached them. They look great.
  • Removed old epoxy spills in the cabin and on deck.
  • Used 3M 4200 to glue down the bilge pump and float switch in bilge. Also, finally wired the bilge pump properly to the panel so it operates automatically and manually as well.
  • Touched up the bottom paint with blue Total Boat Krypton.
  • Put 4-5 coats of PolyGlo (amazing stuff!) on the hull, and now she looks great.

I never did get around to making a better swim ladder rope.

After some rest, I’m looking forward to a relaxing summer of fair winds and smooth sailing! DB

Swapping out the cutlass bearing (and other joys of spring boat prep)

On By David BranbyIn Commissioning & De-commissioning, Keeping Up Appearances, Mechanical Stuff, SplendidoLeave a comment

Our good old boat turns 30 this year, so it was no big surprise that spring commissioning would entail a few more tasks than usual to keep her ship-shape. It helped a lot to have fellow sailor Ancil — an incredibly talented, mechanically inclined guy — poke around Splendido when she was on the hard and notice things I hadn’t noticed. One day, he grabbed hold of the prop drive shaft and said, “You need a new cutlass bearing.” Before I knew it, we were working together to remove the old bushing that supports the drive shaft and tapping in a new one, as shown in this video. The untold part of the video above is that we got a little excited and ended up crimping one edge of the new cutlass bearing as we were tapping it in, so I had to buy a new $75 part from Catalina Direct and re-do it. C’est la guerre.

Ancil struck again by noticing that Splendido’s exhaust thru-hull was cracked. That was a bit of a shocker, as I started playing with it and it broke and literally fell out of the boat. Yikes! Many online searches and phone calls later, and I was able to get Catalina Direct to source a serviceable replacement that is now posted on their website. Having that one fail inspired me to replace four more of the thru-hulls in the boat, and I think they turned out pretty well — plus, it gave me an easy opportunity to use Marelube on all of the seacocks, and to improve access to the annoying one under the kitchen sink.

The fairlead tracks were leaking and allowing water into the balsa of the deck, so Debbie and I drilled and filled them with epoxy and installed new stainless fasteners all down the line. I’m still cleaning up the epoxy drips, but the good thing about an older boat with an oxidized fiberglass deck is that they’re a little easier to deal with — a sharp razor-blade and a bit of heat gun action seems to be doing the trick.

We launch next Tuesday, so I’m excited to finally get her back out on Lake Tahoe. Other honey-dos this winter included riveting on a new gooseneck to boom and mast, and doing a quick re-varnish of the cabin lockers, drink holder, and oars. Ah, the aroma of varnish stinking up the garage in the morning. It smells like … sailing season!

This morning, it’s back to the boat yard to caulk the fairlead tracks, clean up epoxy drips, Thixo some aged, cracked plastic pieces, and maybe touch up some paint on boat and trailer. I promise, my next post will be about actually sailing on Lake Tahoe — that is, if Zephyrus grants us the privilege.

Fair winds and smooth sailing. DB

High and Dry: Diving into Winter Projects

On By David BranbyIn Commissioning & De-commissioning, Keeping Up Appearances, Mechanical Stuff, SplendidoLeave a comment
Photo of SV Splendido, a Catalina 270 sailboat, undergoing winter repairs on the deck.

We pulled Splendido out of the lake a little early this season as Debbie and I were celebrating our 30th wedding anniversary by taking a 10-day road trip down the gorgeous California coast. When we returned, I went to work on some projects that were adding up, including replacing the fasteners for the fairlead tracks, which had been letting condensation through the deck into the cabin, and staining the curtains and ceiling with a “tea” comprised of dirt and maybe rust or corrosion from the so-called stainless steel barrel nuts, some of which had just decomposed and fell out of the ceiling after all these years. Splendido is, after all, now 30 years old, so the working of the boat must’ve done its thing to the hardware.

While winterizing the boat, I noticed (not for the first time, mind you) that the boom gooseneck assembly had really worn down over the years, to the point where my sailing buddy Ancil remarked, “I’m surprised it hasn’t broken off yet.” So, the process of finding a replacement began for venerable Isomat boom parts. At length, I did find a source (and this, after contacting Catalina Yachts’ factory in Florida and another party who evidently purchased all the back stock of parts from Catalina’s factory, both non-responsive to my inquiries) and that was at Rig-Rite, Inc. I found what I was looking for on their website, but as luck would have it, their shopping cart wasn’t working today, so I’ll have to wait until Monday to call and complete the transaction.

I do want to express my thanks to Ancil, who is graciously renting me some space in his pasture once again to store Splendido this winter. I didn’t write about it before, but my experiment of keeping her up at the lake last winter was an unmitigated waste of resources. She got far more beaten up by the storms at elevation — even though she was (expensively) shrink-wrapped — than she ever has wintering on the hard down here in Reno. I was stunned at how the storms up there blew debris up and under the tight “skirt” of the shrink-wrap and so she was just filthy when I went to uncover her last spring. And, the areas that were covered by this “skirt” had a weird pink mold growing, which was a delight to clean off, let me tell you. So, I learned my lesson and she’s staying close to home this winter so I can get some work done. The list, as always, is long, but so is the dark season here, so I’ll just chip away and see that I can do. For now, it’s sealing the fairlead track holes with epoxy and re-drilling them so they’re watertight.

Additional thanks goes to Ancil, who is one of the most mechanically inclined people I’ve ever met. He’s helped me out of half a dozen mechanical fixes already, and for that, I am grateful. It’s a small community of sailors here where I live, but not a bad one in the bunch so far. I’m looking forward to getting back on the water as soon as I can. Until then …

Fair winds and following seas. DB

Friend Ships: Gary Hamilton’s Catalina 270, “Nothing Like This”

On By David BranbyIn Friend Ships, Keeping Up Appearances, Mechanical Stuff, Splendido2 Comments

If there’s anyone I’ve encountered who embodies the phrase, “Believe me, my young friend, there is nothing – absolutely nothing – half so much worth doing as simply messing about in boats,” it would be sailor Gary Hamilton of Wabamun Lake in western Canada. I have followed Gary’s Sailing in western Canada blog for years, and each visit leaves me in bewildered awe at the way Gary has tricked out his lovely Catalina 270, Nothing Like This, with ingenious upgrades and improvements to the already wonderful Gerry Douglas design. He’s also one of the most generous folks out there on the Catalina 270 forums, keeping the conversation going about all things related to sailing the C270. I reached out to Gary for some insights on his philosophy and process, and he was kind enough to share, in words and photos, his passion for making the most of his time on the water.

Q&A with Gary Hamilton, Skipper, Nothing Like This

Q: How did you come about owning Nothing Like This? 

A: I was looking on Yachtworld one day, saw a 270 for sale in Denver and this adventure began. The trailer was home-made, and the border guys wouldn’t let it into Canada, so it went to Seattle, got tossed in the big lake (ed note: the Pacific Ocean), the trailer got hauled across on a flatbed, the boat got motored to Vancouver, reunited and driven home. Take that, border people!

Q: Did you own a sailboat before you bought her? How did you start sailing, and how long ago?

A: I’ve owned boats almost all my life. I had a brand-new MacGregor 26 in 1993, and discovered a tippy, smallish boat with no headroom. But it trailers easily and we went a lot of places with it.

Q: I know you’ve done a bunch of upgrades to your boat and trailer over the years … can you give us a rundown on them?

A: The list is long quite long. A full RayMarine electronics installation with autopilot and tactical. A home-made top down furler with home-made bow sprit for the asymmetrical kite, upgraded virtually every sail-handling system, and added back winches, making it a pleasure to sail. Designed and built a dodger and a Bimini while learning how to sew; bought a TechSew machine that is cheap offshore and finicky as all get out. Solar installation, and pretty much redesigned the trailer from the ground up, lowering the boat over 20” and allowing a trailer launch, with three axles for on the road peace of mind.

Q: Are you an engineer by training? A lot of your projects seem quite involved. Are they projects anyone could do?

A: I am a technical director for an electronics company by trade. I have no issue diving into almost any kind of project; the trick is to do sufficient research, understand, or go find out the issues that exist for what you want to accomplish, have a goal, and be prepared to make and correct mistakes.  The trailer project was way, way out of my league, but the basic shape was already there, and the placement of the new axles was a calculated guess. The boat was close and has had two relatively minor adjustments since.  The dodger was probably an order of magnitude harder; I had literally no idea what I was doing, had really never operated a sewing machine, and I spent a good month building stuff, watching and copying ways of doing stuff. Now I can do a French seam. Is it straight? It’s straight enough for me. 

Q: What do you love most about Nothing Like This and sailing Wabamun Lake?

I’d rather be at the coast. Wabamun Lake is an inland lake that is close to the foothills. It’s shallow, so there isn’t much fetch, there’s no current, the wind shifts can be 180 degrees, which is why there’s a top-down furler for the kite, and when weather rolls in, it sometimes does so with a vengeance. What I love the most is that I can be on the boat in 35 minutes from my house, and the sun doesn’t set till 11 in July.  

Q: What would you change about your boat/what upgrades do you have planned?

A: I’m not happy with the bilge pump arrangement, and will likely yank it all out and do something else. If I were to change anything, I’d make the berth access like that on a 28mkii and get rid of the door. This business of turning sideways and contorting yourself into a hernia to get in there is rather annoying.

Q: What was your most fun or interesting time on Wabamun Lake?

A: I’d have to say exercising the controls on the boat to the fullest and having people try to keep up.  No smugness there — ha ha!

Q: What was your worst experience sailing western Canada?

A: Breaking rudder cables on the MacGregor. There are lots of shallow spots, and you need to know where they are. We hit something in the Catalina 270 last year (that was a first!) and put a little divot in the keel. Yikes!

Q: What would you tell people about sailing western Canada they might be surprised to know?

A: It’s like sailing a mountain lake. Don’t tack on the wind shifts. We had some world class sailors on the MacGregor once, and they didn’t believe it, and we were dead last on the Wednesday night series, where we were usually top five. Go figure.

Q: Any final thoughts?A: I still think that everybody out west should plan a get-together at the coast. Get a mortgage and buy some fuel.  Let’s go!


Thanks so much for the inspiration, Gary. Fair winds and following seas! DB

At least the wind is free

On By David BranbyIn Commissioning & De-commissioning, Keeping Up Appearances, Mechanical Stuff, SplendidoLeave a comment
Pumping out is generally free, too, although a tip of $5-$20 is much appreciated by the dock hands.

As I begin planning our spring commissioning, I am thinking a bit about the costs associated with sailing here at Lake Tahoe. Our 1993 Catalina 270 is a relatively small sailing vessel, but nevertheless, I have kept spreadsheets over our nearly 12 years of ownership to track what it costs to keep her up and sail her during our 4-5 month season here. I’m interested in learning how our experience stacks up to other small sailboat owners out there, so feel free to comment or post your own records if you’re comfortable doing so.

Every hobby comes with its price tag, and I think there is the impression out there among the general public that sailing is either a rich person’s sport, or that it’s “free” because the wind is free. This year, it’s likely to be a bit more spendy because we’re having the standing rigging replaced and we’ve kept her on the hard over the winter at Obexer’s on the west shore of Lake Tahoe while that work is being done. Oh, and I did decide to splurge and get a new furling headstay, so there’s that. But for now, I’m going to share my 2019 spreadsheet, as that’s pretty typical for what it costs us to prep, moor and sail at Tahoe each summer.

Let me know how your sailing season runs — and if there’s something wonky-looking about my expenses, let me know.

Here’s to fair winds, following seas, and (hopefully) a smoke-free sailing season! DB

Back On Lake Tahoe After 634 Days

On By David BranbyIn Commissioning & De-commissioning, Mechanical Stuff, On The Water, Splendido1 Comment


It feels awesome to have Splendido back out on Tahoe. Tracy and I launched her last Wednesday, June 16, and had a relatively smooth time of it. Launching every year is an exercise in project management—I had a three page pre-launch checklist, and still, we somehow lost a shroud turnbuckle on the drive up. Tracy, who started his working life as an iron worker before earning his degree in civil engineering, pulled out some high-tension wire and rigged a temporary latticework wiring to hold the shroud in place while we put in an order for a replacement turnbuckle. It was a work of art.

There’s a new rigger at Obexer’s named Pete Lewis, a mechanical engineer by training and a helpful guy. He put the order in for the new turnbuckle, and he and I got to talking about rigging in general—which made me think about the last time Splendido’s standing rigging was replaced. Short answer: I don’t know. So, that is also on the list for fall 2021.

I actually had a lot of fun getting her ready to sail last week, but I had to laugh—after more than a year and a half on the hard, a robin had made a beautiful, elaborate nest in the anchor locker! I just discovered it when Debbie and I went up yesterday to install the 150 genoa and attach the lines to the newly-tailored lazy bag. I gently picked up the tangle of hay, feathers and broken egg shells and set it out on the water—an avian Kon Tiki that gently floated away.

As soon as we get the new turnbuckle delivered and installed, it’s sail time. Grateful to our new buoy owner, Chris Champas, and hoping that the summer fire season is mild. Fingers crossed—South Lake Tahoe hit 91 degrees last week … six degrees warmer than the last same-day record of 85 degrees, set in 1985.

And, as happens when launching, I dropped a brand-new $38 impeller over the side at our buoy. It will be the first thing I dive for when I get my PADI scuba certification in mid-July.

Fair winds and following seas! DB