Our good old boat turns 30 this year, so it was no big surprise that spring commissioning would entail a few more tasks than usual to keep her ship-shape. It helped a lot to have fellow sailor Ancil — an incredibly talented, mechanically inclined guy — poke around Splendido when she was on the hard and notice things I hadn’t noticed. One day, he grabbed hold of the prop drive shaft and said, “You need a new cutlass bearing.” Before I knew it, we were working together to remove the old bushing that supports the drive shaft and tapping in a new one, as shown in this video. The untold part of the video above is that we got a little excited and ended up crimping one edge of the new cutlass bearing as we were tapping it in, so I had to buy a new $75 part from Catalina Direct and re-do it. C’est la guerre.

Ancil struck again by noticing that Splendido’s exhaust thru-hull was cracked. That was a bit of a shocker, as I started playing with it and it broke and literally fell out of the boat. Yikes! Many online searches and phone calls later, and I was able to get Catalina Direct to source a serviceable replacement that is now posted on their website. Having that one fail inspired me to replace four more of the thru-hulls in the boat, and I think they turned out pretty well — plus, it gave me an easy opportunity to use Marelube on all of the seacocks, and to improve access to the annoying one under the kitchen sink.

The fairlead tracks were leaking and allowing water into the balsa of the deck, so Debbie and I drilled and filled them with epoxy and installed new stainless fasteners all down the line. I’m still cleaning up the epoxy drips, but the good thing about an older boat with an oxidized fiberglass deck is that they’re a little easier to deal with — a sharp razor-blade and a bit of heat gun action seems to be doing the trick.

We launch next Tuesday, so I’m excited to finally get her back out on Lake Tahoe. Other honey-dos this winter included riveting on a new gooseneck to boom and mast, and doing a quick re-varnish of the cabin lockers, drink holder, and oars. Ah, the aroma of varnish stinking up the garage in the morning. It smells like … sailing season!

This morning, it’s back to the boat yard to caulk the fairlead tracks, clean up epoxy drips, Thixo some aged, cracked plastic pieces, and maybe touch up some paint on boat and trailer. I promise, my next post will be about actually sailing on Lake Tahoe — that is, if Zephyrus grants us the privilege.

Fair winds and smooth sailing. DB